Which fixing do I need for the job?
 |
PRODUCT: FIS V150 C Resin
Description
- FIS VS 100 P is fitted with a screw-in plunger and ejected by hand.
- FIS VS 150 C can be extruded by using an application gun for sealants.
- Especially with longer gelling time and lower application pressure.
- Resin and cement as well as water and hardener are stored in two separate chambers and are not mixed and activated until pushed through the static mixer.
- Partially-used cartridges can easily be reused by changing the static mixer.
Advantages/Benefits
- High-performance High-performance hybrid mortar for highest loads in almost all building materials.
- Suitable for use with reinforcement bars.Universal fixing system for a broad range of applications on building sites.
- Longer gelling time for simple installation and for high ambient temperatures.
- Expansion-free anchoring allows low axial spacings and edge distances.
- Extensive range of accessories for a wide variety of applications.
- Using application guns for sealants saves money (FIS VS 150 C )
|
 |
PRODUCT: SX Nylon Plug (Innovation)
- Nylon expansion fixing
- For use with wood, chipboard and self-tapping screws and ASL spacer screws.
- SX long version for maximum load-bearing capacity in perforated building materials, aircrete and to bridge plaster.
Advantages/Benefits4-way expansion form lock guarantees highest grip.
- Anti-rotation lugs stop the plug rotating in the drill hole.
- The wide neck is subject to no expansion pressure and prevents surface damage to tiles and plaster.
- Simple and quick push-through installation reduces installation time.
- Integrated co-rotation lock enables - with pre-assembled screw - push-through fixing.
- The plug´s collar prevents it slipping deeper into the drilled hole.
- Temperature-resistant from -40° to +80°C.
- The plug's geometry allows the use of wood and chipboard screws between 2 and 12 mm.
Description |
 |
PRODUCT TYPE: CAVITY FIXING KT / KD Toggle Type
Description
- Nylon toggle K 54
- Cavity fixing with a tilting crosspiece for woodscrews, 4 mm diameter
- Spring toggle KD/ KDH 3/4
- Expands by spring force into any cavity.
- Gravity toggle KD/ KDH 5/6/8
- Has a tilting crosspiece which automatically locks itself in cavities.
- KM 10
- Specially designed for fixing washstands and urinals to plumbing units and cavity walls.
Advantages/benefits
- Surface-flush Nylon toggle K54 allows the attached item to be removed and refitted several times.
- KD and KDH toggles are specially designed for small cavity depths.
- All KD and KDH are fully zinc-plated and yellow chromated for good corrosion protection.
- Long threaded rods allow large wall thicknesses to be bridged.
|
|
|
PRODUCT: SXS FRAME FIXING (Innovation)
Description
- First nylon frame fixing approved for cracked concrete.
- Fixing sets with A4 stainless steel CO-NA screws for external applications and in damp conditions.
Advantages/benefits
- The fischer CONA screw makes the SXS economic as it allows high permissible loads and bending moments which reduces the amount of necessary fixings.
- All the fixings with pre-installed screw.
- Integral hammer-in stop prevents the fixing from expanding prematurely during installation.
- The SXS-F US version does not require additional washers and prevents contact corrosion.
- Large range for wood and metal constructions (in- and outdoor) for many applications.
|
|
|
PRODUCT TYPE: FUR FRAME FIXING
Description
- Universal frame fixing.
- Anchorage in solid materials by means of friction locking.
- The asymmetrical close set teeth expand and formlock in hollow materials.
- Fixing sets with A4 stainless steel safety screws can for applications in damp conditions.
Advantages/benefits
- Universal for all building materials.
- All the fixings with pre-installed screw.
- Patented asymmetrical teeth guarantee high load-bearing capacity in solid and perforated brick.
- Integral hammer-in stop prevents the fixing from spreading prematurely during installation.
- The FUR-FSS version does not require additional washers and prevents contact corrosion.
- Large range for wood and metal constructions (in- and outdoor) for many applications
|
|
|
PRODUCT: SRS Standard Frame Fixing
Description
- Nylon expansion frame fixing.
- Fischer A4 stainless steel safety screw for external use and in damp conditions.
Advantages/benefitsEconomic and safe due to approval as multiple fixing in solid building materials and concrete.
- Safety, as common sizes are pre-assembled with the fischer safety screw.
- Integral hammer-in stop prevents the fixing from spreading prematurely during installation.
|
